Acacia Gris 9 x 34 Porcelain Wood Look Tile

Description

Acacia Gris 9 x 34
Porcelain Wood Look Tile Made in Spain

The Acacia Gris 9 x 34 wood-looking porcelain tile comes with a beautiful textured finish that accurately simulates a hardwood floor. These beautiful tiles come with non-rectified or pressed edges to simulate a real hardwood plank look and a matte finish that feels real to the touch. This collection is designed and manufactured in Spain by Prissmacer. Their manufacturing processes are subject to strict quality controls to make sure the tiles are free of defects and are consistent in size and tonality. With a PEI Class III rating, this floor is more than adequate for high traffic areas in residential applications. This line falls under the R11 classification for anti-slip properties. This rating deems the tiles safe for residential and commercial areas with high traffic, even for children and elderly people.

The non-rectified edges provide a realistic hardwood floor surface look. The manufacturer recommends installing the tiles with 1/8 in (3 mm) grout line. A smaller grout line can be achieved with minimal “lippage” using a leveling-spacer installation system. The manufacturer also recommends installing the planks with an offset of 25% or less to minimize the bowing effect. A 15-20% offset is optimal to achieve a real hardwood pattern. You can achieve regular staggered patterns or herringbone patterns with this product. Never install porcelain tiles on a “brick pattern” or 50% offset pattern. For more information about this product please Contact Us.

Product Overview

• Each tile is approximately 9 by 34 inches or exactly 22 by 85 centimeters.
• Each box contains 8 tiles for a total coverage of 16.15 sq ft and weighs 70 lbs.
• There are 45 boxes and 726.75 square feet per pallet. Each pallet weighs approximately 3175 lbs.
• Non-rectified edges provide a true hardwood floor look.
• These tiles come with a matte, textured finish that provide an anti-slip surface.
• The color variation from tile to tile is very minimal (V2).
• Excellent for high traffic areas on residential applications.
• This tile is frost resistance and allows for covered outdoor applications.
• Do not install in brick pattern or 50% offset. Doing so will accentuate the bowing that is inherent to tile manufacturing.
• When installing this floor, a minimal grout line of 1/8 in (3 mm) is recommended by the manufacturer.
• Doing a 1/16 in grout line or smaller can cause some unevenness or “lippage” between tiles if not done properly.
• The use of a multi-purpose thin-set mortar is recommended for these tiles.

Additional information

Maintenance

Guidelines

Porcelain and ceramic tiles are extremely durable under normal use. Porcelain tiles are non-porous which makes them highly stain resistant. Porcelain and ceramic tiles are very low maintenance; common household spills are easy to clean with the use of a mop, warm water, and a pH neutral cleaner. Do not use acidic cleaners on porcelain or ceramic products. Grout is easily stained. We recommend the use of a grout sealer or a polymer based grout material during installation for the highest stain resistance. Mop your floors at least every other week to prevent grout stains and dirt buildup.

Disclaimers

Properties

All images are representative of a product’s potential characteristics and are only meant to provide and overall look of the product. Because colors and shading vary on different screens, we do not guarantee that these images will 100% match the actual product. Tiles are subject to variations in color, shade, sizing, surface texture and finish. Field tiles and corresponding trims and accessories may not match 100%.

Installation

The maximum allowable installation offset is 20% unless otherwise indicated. Always install with a grout line. No claims will be considered when the product is installed without grout lines. Minimum grout joint must be 1/8 inch. We strongly recommend the use of a leveling system during installation. Do not use the product on pools, spas, hot tubs and/or submerged applications unless otherwise specifically indicated. Please refer to the TCNA Handbook for the latest porcelain and ceramic tile installations guidelines.

Prior to installation, installer must blend tiles from several different boxes to achieve an even distribution of color range and to avoid or minimize pattern repetition. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. All products are deemed accepted once installed.

We reserve the right to make changes to product specifications at any time without notice.