Davos Sway Grey 9 x 36
Porcelain Wood Tile Made in Spain
The Davos Sway Grey 9 x 36 is a wood-looking porcelain tile that comes with a smooth matte finish that accurately simulates an oak hardwood floor. These tiles come with rectified (square) edges to help minimize grout lines and to provide and even surface look. This collection is designed and manufactured in Spain by Cifre Ceramica under the absolute highest quality standards. Their tiles go through extensive testing to significantly reduce the bowing rate that is inherent to porcelain tile manufacturing. With a PEI Class IV rating, this floor is more than adequate for high traffic areas in residential applications, and recommended for commercial settings.
The rectified edges provide a seamless surface look, perfect for modern spaces. The manufacturer recommends installing the tiles with 1/8th of an inch grout line. A smaller grout line can be achieved with minimal “lippage” using a leveling-spacer installation system. The manufacturer also recommends installing the planks with an offset of 25% or less to minimize the bowing ratio. A 15-20% offset is optimal to achieve a real hardwood pattern. You can achieve regular staggered patterns or herringbone patterns with this product. Never install porcelain tiles on a “brick pattern” or 50% offset pattern.
- Each tile is approximately 9 by 36 inches or exactly 22.5 by 90 centimeters.
- Each box contains 6 tiles for a total coverage of 13.13 sq ft and weighs 57.32 lbs.
- There are 48 boxes and 630.24 square feet per pallet. Each pallet weighs approximately 2800 lbs.
- Rectified edges help minimize grout lines and provide an even surface look.
- These tiles come with a beautiful, smooth matte finish that accurately resembles an oak hardwood floor.
- The color variation from tile to tile is slightly noticeable (V2).
- Excellent for high traffic areas for residential purposes. Suitable for normal traffic areas in commercial settings.
- This tile is frost resistance that allows for outdoor applications.
- Do not install in brick pattern or 50% offset. Doing so will accentuate the bowing that is inherent to tile manufacturing.
- When installing this floor, a minimal grout line of 1/8 in. is recommended by the manufacturer.
- Doing a 1/16 in. grout line or smaller can cause some unevenness or “lippage” between tiles if not done properly.
- Can be installed using multi-purpose thin-set or regular mortar.