Guayacan Beige 8 x 48 Porcelain Wood Look Tile

Description

Guayacan Beige 8 x 48
Porcelain Wood Look Tile Made in Ecuador

The Guayacan Beige 8 x 48 is a  beautiful and modern wood-looking porcelain tile. These gorgeous tiles with rectified edges come in gorgeous contemporary shades of grays. They feature an incredibly real hardwood texture made with the latest Emboss in Register (EIR) technology. This technique consists in matching the engraved texture with the printed wood-grain to achieve a super-realistic hardwood texture, that looks incredible specially when viewed against the light. The extra wide and long porcelain tile planks allow for a series of modern patterns that will make any room look amazing. And since these are rectified tiles the clean, straight edges will provide an even surface look throughout your floors as well as minimal grout lines. Founded in 1994, Graiman the manufacturer of these tiles has been leading the ceramic and porcelain tile industry in South America for the better part of the last decade.

It is recommended that these tiles are installed with a maximum offset of 25%. But a 15 to 20% offset is optimal to achieve a real hardwood-like pattern. These tiles are more than adequate for high traffic areas in residential and commercial settings.

Product Overview

• The planks measure 20 x 120 cm. which is approximately 8 inches wide by 48 inches long.
• Each box contains 7 pieces and covers 17.35 sq ft. and weighs about 83.2 lbs.
• There are 24 boxes and 416.4 square feet per pallet. Each pallet weighs approximately 2000 lbs.
• Rectified edges provide an even surface look on the joints and allow for thin grout lines.
• The shade variation from plank to plank is very noticeable (V4).
• Excellent for high traffic areas for residential purposes. Suitable for high traffic areas in commercial settings.
• This tile is frost resistance. The manufacturer recommends a maximum offset of 25%.
• The manufacturer also recommends a minimal grout line of 1/8 in. and the use of a tile leveling system spacers.
• Doing a 1/16 in. grout line or smaller can cause some unevenness or lippage between tiles if not done properly.
• These tiles should be installed using multi-purpose thin-set but a mortar or Portland cement can be used as well.

Additional information

Maintenance

Guidelines

Porcelain and ceramic tiles are extremely durable under normal use. Porcelain tiles are non-porous which makes them highly stain resistant. Porcelain and ceramic tiles are very low maintenance; common household spills are easy to clean with the use of a mop, warm water, and a pH neutral cleaner. Do not use acidic cleaners on porcelain or ceramic products. Grout is easily stained. We recommend the use of a grout sealer or a polymer based grout material during installation for the highest stain resistance. Mop your floors at least every other week to prevent grout stains and dirt buildup.

Disclaimers

Properties

All images are representative of a product’s potential characteristics and are only meant to provide an overall look of the product. Because colors and shading vary on different screens, we do not guarantee that these images will 100% match the actual product. Tiles are subject to variations in color, shade, sizing, surface texture and finish. Field tiles and corresponding trims and accessories may not match 100%.

Installation

The maximum allowable installation offset is 20% unless otherwise indicated. Always install with a grout line. No claims will be considered when the product is installed without grout lines. Minimum grout joint must be 1/8 inch. We strongly recommend the use of a leveling system during installation. Do not use the product on pools, spas, hot tubs and/or submerged applications unless otherwise specifically indicated. Please refer to the TCNA Handbook for the latest porcelain and ceramic tile installations guidelines.

Prior to installation, installer must blend tiles from several different boxes to achieve an even distribution of color range and to avoid or minimize pattern repetition. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. All products are deemed accepted once installed.

We reserve the right to make changes to product specifications at any time without notice.