Legend Brown 8 x 48 Porcelain Wood Look Tile

Description

Legend Brown 8 x 48
Porcelain Wood Look Tile Made in Italy

The Legend Brown 8 x 48 is a Porcelain Wood Look Tile has a spectacular time-worn texture,  the same kind of texture present in reclaimed wood. These gorgeous tiles come with plenty of character marks, realistic knots, and high contrasts. Which are the true signs of materials deeply transformed by the passing of time. Because of the extra wide and long planks, the installer can achieve a series of modern patterns that will make any room look amazing. And the rectified edges provide an even surface look throughout your floors, as well as barely visible grout lines.

Ariana Ceramica is a brand of ABK Group, the manufacturer the tile. They create innovative products under the highest quality controls. This collection is a true sign of that. These tiles are made with an ultra thin construction. That combined with a patented recipe of polymer-based materials allow the tiles to be “flexible”. This means an easier installation with minimum grout lines. It also reduces lippage to virtually nothing, even when not using a leveling system. Ariana recommends installing the planks with a maximum offset of 20%. But it also allows a 50% or brick pattern because of the flexible properties of the product. A 15 to 20% offset is optimal to achieve a real hardwood pattern. These tiles are more than adequate for high traffic areas in residential and commercial settings.

Product Overview

• The planks measure 20 x 120 cm. which is approximately 8 inches wide by 48 inches long.
• Each box contains 4 pieces and covers 10.33 sq ft. and weighs 40.15 lbs.
• There are 54 boxes and 557.82 square feet per pallet. Each pallet weighs approximately 2225 lbs.
• Rectified edges provide an even surface look on the joints or grout lines.
• These tiles come with a lot of splits, knots and veins; as well as a somewhat distressed or time-worn texture.
• The variation from plank to plank is moderately visible.
• Excellent for high traffic areas for residential purposes. Suitable for high traffic areas in commercial settings.
• This tile is frost resistance. The manufacturer recommends a maximum offset of 25%.
• The manufacturer also recommends a minimal grout line of 1/8 in.
• Doing a 1/16 in. grout line or smaller can cause some unevenness or lippage between tiles if not done properly.
• These tiles can installed using multi-purpose thin-set or regular mortar cement.

Additional information

Videos

Maintenance

Guidelines

Porcelain and ceramic tiles are extremely durable under normal use. Porcelain tiles are non-porous which makes them highly stain resistant. Porcelain and ceramic tiles are very low maintenance; common household spills are easy to clean with the use of a mop, warm water, and a pH neutral cleaner. Do not use acidic cleaners on porcelain or ceramic products. Grout is easily stained. We recommend the use of a grout sealer or a polymer based grout material during installation for the highest stain resistance. Mop your floors at least every other week to prevent grout stains and dirt buildup.

Disclaimers

Properties

All images are representative of a product’s potential characteristics and are only meant to provide and overall look of the product. Because colors and shading vary on different screens, we do not guarantee that these images will 100% match the actual product. Tiles are subject to variations in color, shade, sizing, surface texture and finish. Field tiles and corresponding trims and accessories may not match 100%.

Installation

The maximum allowable installation offset is 20% unless otherwise indicated. Always install with a grout line. No claims will be considered when the product is installed without grout lines. Minimum grout joint must be 1/8 inch. We strongly recommend the use of a leveling system during installation. Do not use the product on pools, spas, hot tubs and/or submerged applications unless otherwise specifically indicated. Please refer to the TCNA Handbook for the latest porcelain and ceramic tile installations guidelines.

Prior to installation, installer must blend tiles from several different boxes to achieve an even distribution of color range and to avoid or minimize pattern repetition. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. All products are deemed accepted once installed.

We reserve the right to make changes to product specifications at any time without notice.