Description
Nexus Glaciar 24 x 48
Porcelain Tile Made in Spain
The Nexus Glaciar 24 x 48 Porcelain Tile comes in a beautiful “lappato” finish, a modern semi-glossy surface finish that makes this tile look like semi-polished concrete. These large format tiles come with rectified edges to minimize grout line up to 1/16th of an inch and achieve the marble tile look. Designed and manufactured in Spain by Cifre Ceramica under strict quality controls that significantly reduce the bowing rate that is inherent to porcelain tile manufacturing. This floor is more than adequate for high traffic areas in residential applications, and even on commercial settings. The rectified edges provide an even surface look on the joints or grout lines. The manufacturer recommends installing the tiles on a square or diamond pattern with 1/8th of inch grout line. A smaller grout line can be achieved with minimal “lippage” with a leveling-spacers installation system. Never install porcelain tiles on a “brick pattern” or 50% offset pattern.
Product Overview
- Each tile is approximately 24 by 48 inches or exactly 60 by 120 centimeters.
- Each box contains 2 tiles for a total coverage of 15.50 sq ft and weighs 83.78 lbs.
- There are 24 boxes and 372 square feet per pallet. Each pallet weighs approximately 2050 lbs.
- Rectified edges provide an even surface look on the joints or grout lines.
- These tiles come with a beautiful lappato finish that makes them look like semi-polished concrete
- The color variation from tile to tile is slightly noticeable.
- Excellent for high traffic areas for residential purposes. Suitable for high traffic areas in commercial settings.
- This tile is frost resistance. Do not install in brick pattern or 50% offset.
- When installing this floor, a minimal grout line of 1/8 in. is recommended by the manufacturer.
- Doing a 1/16 in. grout line or smaller can cause some unevenness or “lippage” between tiles if not done properly.
- Can be installed using multi-purpose thin-set or regular mortar.
