Rovere Nature 9 x 36 Porcelain Wood Look Tile

$2.49 / sq. ft.

Actual Area (sq. ft.) 13.13
Total Price $32.69

If you find this same product for a lower price please let us know. We'll review your other offer and try to get you a better deal. (Remember to attach your other quote or send us the product link of the other website)
SKU: WT-PORROVNAT-936 Categories: ,
 

Description

Rovere Nature 9 x 36
Porcelain Wood Tile Made in Spain

The Rovere Nature 9 x 36 is a wood-looking porcelain tile that comes with a smooth matte finish that accurately simulates a wire-brushed oak wood texture. These tiles come with non-rectified or pressed edges to simulate a real hardwood plank look. Even with non-rectified edges, these planks allow for minimal grout lines of up to 1/16th of an inch (about 2 mm.). This collection is designed and manufactured in Spain by Cifre Ceramica under the absolute highest quality standards. Their tiles go through extensive testing to significantly reduce the bowing rate that is inherent to porcelain tile manufacturing. With a PEI Class IV rating, this floor is more than adequate for high traffic areas in residential applications, and recommended for commercial settings.

The non-rectified edges provide a realistic hardwood floor surface look. The manufacturer recommends installing the tiles with 1/8th of an inch grout line. A smaller grout line can be achieved with minimal “lippage” using a leveling-spacer installation system. The manufacturer also recommends installing the planks with an offset of 25% or less to minimize the bowing ratio. A 15-20% offset is optimal to achieve a real hardwood pattern. You can achieve regular staggered patterns or herringbone patterns with this product. Never install porcelain tiles on a “brick pattern” or 50% offset pattern.

Product Overview

  • Each tile is approximately 9 by 36 inches or exactly 22.5 by 90 centimeters.
  • Each box contains 6 tiles for a total coverage of 13.13 sq ft and weighs 57.32 lbs.
  • There are 48 boxes and 630.24 square feet per pallet. Each pallet weighs approximately 2800 lbs.
  • Non-rectified edges provide a realistic hardwood floor look.
  • These tiles come with a beautiful, smooth matte finish that accurately simulates a wire-brushed oak wood texture.
  • The color variation from tile to tile is slightly noticeable (V2).
  • Excellent for high traffic areas for residential purposes. Suitable for normal traffic areas in commercial settings.
  • This tile is frost resistance that allows for outdoor applications.
  • Do not install in brick pattern or 50% offset. Doing so will accentuate the bowing that is inherent to tile manufacturing.
  • When installing this floor, a minimal grout line of 1/8 in. is recommended by the manufacturer.
  • Doing a 1/16 in. grout line or smaller can cause some unevenness or “lippage” between tiles if not done properly.
  • Can be installed using multi-purpose thin-set or regular mortar.

Additional information

Weight58 lbs
Dimensions36 × 9.5 × 3 in
Application

Residential, Commercial

Box Weight

58 lbs

Contruction

Grey Body

Country of Origin

Spain

Box Coverage

13.13 sq ft

Durability

PEI 4

Edges Type

Non-Rectified (Pressed)

Surface Finish

Matte

Location

Floor, Outdoor, Shower, Wall

Boxes per Pallet

48 boxes

Pallet Coverage

630.24 sq ft

Pallet Weight

2800 lbs

Pieces per Box

6 pieces

Imaging

HD Inkjet

Actual Size

22.5 x 90 cm

Nominal Size

9 x 36 in

Texture

Wire Brushed

Thickness

7/16 in (11 mm)

Shade Variation

V2 (Slight)

Print Variations

Up to 24 Variations

Maintenance

Guidelines

Porcelain and ceramic tiles are extremely durable under normal use. Porcelain tiles are non-porous which makes them highly stain resistant. Porcelain and ceramic tiles are very low maintenance; common household spills are easy to clean with the use of a mop, warm water, and a pH neutral cleaner. Do not use acidic cleaners on porcelain or ceramic products. Grout is easily stained. We recommend the use of a grout sealer or a polymer based grout material during installation for the highest stain resistance. Mop your floors at least every other week to prevent grout stains and dirt buildup.

Disclaimers

Properties

All images are representative of a product’s potential characteristics and are only meant to provide and overall look of the product. Because colors and shading vary on different screens, we do not guarantee that these images will 100% match the actual product. Tiles are subject to variations in color, shade, sizing, surface texture and finish. Field tiles and corresponding trims and accessories may not match 100%.

Installation

The maximum allowable installation offset is 20% unless otherwise indicated. Always install with a grout line. No claims will be considered when the product is installed without grout lines. Minimum grout joint must be 1/8 inch. We strongly recommend the use of a leveling system during installation. Do not use the product on pools, spas, hot tubs and/or submerged applications unless otherwise specifically indicated. Please refer to the TCNA Handbook for the latest porcelain and ceramic tile installations guidelines.

Prior to installation, installer must blend tiles from several different boxes to achieve an even distribution of color range and to avoid or minimize pattern repetition. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. All products are deemed accepted once installed.

We reserve the right to make changes to product specifications at any time without notice.

Reviews

JC Floors Plus
0.0
powered by Facebook