Tinenza Pulido 24 x 24 Porcelain Tile

SKU: PT-PRITINPUL-2424 Categories: ,


Tinenza Pulido 24 x 24
Full Polished Porcelain Tile

A spectacular series of marble look porcelain tiles. This fantastic line features a super-polished surface finish with a seamless reflection. Additionally its precise rectified edges ensure a uniform surface look and minimal interrumptions of its design. A wide variation of face patterns allows for a gorgeous mix of realistic marble grains.

Product Overview

  • Each tile is approximately 24 by 24 inches or exactly 60 by 60 centimeters.
  • Each box contains 4 tiles for a total coverage of 15.50 sq ft and weighs 68.33 lbs.
  • There are 40 boxes and 620 square feet per pallet. Each pallet weighs approximately 2750 lbs.
  • Rectified edges provide an even surface look on the joints or grout lines.
  • These tiles come with a beautiful super polished finish that simulates polished marble.
  • The durability rating on these tiles is Class IV according to the Porcelain Enamel Institute (PEI).
  • Excellent for high traffic areas for residential purposes, and moderate traffic areas in commercial settings.
  • When installing this floor, a minimal grout line of 1/8 in. is recommended by the manufacturer.
  • Doing a 1/16 in. grout line or smaller can cause some unevenness or “lippage” between tiles if not done properly.
  • The manufacturer recommends the use of levelling spacers when installing this product.
  • Can be installed using multi-purpose thin-set or regular mortar.

Additional information

Weight 69 lbs
Dimensions 24 × 24 × 2 in

Residential, Commercial

Box Weight

69 lbs


Grey Body

Country of Origin


Box Coverage

15.50 sq ft



Edges Type

Rectified (Square)

Surface Finish



Floor, Shower, Wall

Boxes per Pallet

30 boxes

Pallet Coverage

465.00 sq ft

Pallet Weight

2050 lbs

Pieces per Box

4 pieces


HD Inkjet

Actual Size

60 x 60 cm

Nominal Size

24 x 24 in




3/8 in (10 mm)

Shade Variation

V1 (Uniform)

Print Variations

Up to 16 Variations



Porcelain and ceramic tiles are extremely durable under normal use. Porcelain tiles are non-porous which makes them highly stain resistant. Porcelain and ceramic tiles are very low maintenance; common household spills are easy to clean with the use of a mop, warm water, and a pH neutral cleaner. Do not use acidic cleaners on porcelain or ceramic products. Grout is easily stained. We recommend the use of a grout sealer or a polymer based grout material during installation for the highest stain resistance. Mop your floors at least every other week to prevent grout stains and dirt buildup.



All images are representative of a product’s potential characteristics and are only meant to provide and overall look of the product. Because colors and shading vary on different screens, we do not guarantee that these images will 100% match the actual product. Tiles are subject to variations in color, shade, sizing, surface texture and finish. Field tiles and corresponding trims and accessories may not match 100%.


The maximum allowable installation offset is 20% unless otherwise indicated. Always install with a grout line. No claims will be considered when the product is installed without grout lines. Minimum grout joint must be 1/8 inch. We strongly recommend the use of a leveling system during installation. Do not use the product on pools, spas, hot tubs and/or submerged applications unless otherwise specifically indicated. Please refer to the TCNA Handbook for the latest porcelain and ceramic tile installations guidelines.

Prior to installation, installer must blend tiles from several different boxes to achieve an even distribution of color range and to avoid or minimize pattern repetition. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. All products are deemed accepted once installed.

We reserve the right to make changes to product specifications at any time without notice.


Facebook API Ratning: {"error":{"message":"Error validating access token: The session has been invalidated because the user changed their password or Facebook has changed the session for security reasons.","type":"OAuthException","code":190,"error_subcode":460,"fbtrace_id":"AuLeCOLz02HS5lUuDQb9gE9"}}