Verona White 12 x 24 Porcelain Tile

$2.99 / sq. ft.

Actual Area (sq. ft.) 15.5
Total Price $46.35
SKU: PT-EXPVERWHI-1224 Categories: ,
 

Description

Verona White 12 x 24
Full Polished Porcelain Tile

The Verona White 12 x 24 Porcelain Tile comes with a luxurious full polished micro-crystal surface finish that simulates polished marble. These large format tiles come with rectified edges to minimize the grout lines up to 1/16th of an inch and achieve a real marble tile look. Designed in Italy by Primi Ceramiche, and manufactured in China under strict quality controls; these tiles are the perfect marriage between premium design and value. These tiles are carefully inspected to reduce the bowing rate that is inherent to porcelain tile manufacturing. With a PEI Class IV rating, this floor is more than adequate for high traffic areas in residential applications, and recommended for commercial settings. The rectified edges provide an even surface look on the joints or grout lines. The manufacturer recommends installing the tiles on a square or diamond pattern with 1/8th of inch grout line. A smaller grout line can be achieved with minimal “lippage” with a leveling-spacers installation system. Never install porcelain tiles on a “brick pattern” or 50% offset pattern.

Product Overview

  • Each tile is approximately 12 by 24 inches or exactly 30 by 60 centimeters.
  • Each box contains 8 tiles for a total coverage of 15.50 sq ft and weighs 68.33 lbs.
  • There are 40 boxes and 620 square feet per pallet. Each pallet weighs approximately 2750 lbs.
  • Rectified edges provide an even surface look on the joints or grout lines.
  • These tiles come with a beautiful full polished micro-crystal finish that simulates polished Carrara marble.
  • The durability rating on these tiles is Class IV according to the Porcelain Enamel Institute (PEI).
  • The color variation from tile to tile is slightly noticeable.
  • Excellent for high traffic areas for residential purposes, and moderate traffic areas in commercial settings.
  • This tile is frost resistance. Do not install in brick pattern or 50% offset.
  • When installing this floor, a minimal grout line of 1/8 in. is recommended by the manufacturer.
  • Doing a 1/16 in. grout line or smaller can cause some unevenness or “lippage” between tiles if not done properly.
  • Can be installed using multi-purpose thin-set or regular mortar.

Additional information

Weight69 lbs
Dimensions24 × 12 × 3 in
Application

Residential, Commercial

Box Weight

69 lbs

Contruction

Grey Body

Country of Origin

China

Box Coverage

15.50 sq ft

Durability

PEI 4

Edges Type

Rectified (Square)

Surface Finish

Polished

Location

Floor, Shower, Wall

Boxes per Pallet

40 boxes

Pallet Coverage

620.00 sq ft

Pallet Weight

2750 lbs

Pieces per Box

8 pieces

Imaging

HD Inkjet

Actual Size

30 x 60 cm

Nominal Size

12 x 24 in

Texture

Smooth

Thickness

3/8 in (10 mm)

Shade Variation

V2 (Slight)

Print Variations

Up to 16 Variations

Maintenance

Guidelines

Porcelain and ceramic tiles are extremely durable under normal use. Porcelain tiles are non-porous which makes them highly stain resistant. Porcelain and ceramic tiles are very low maintenance; common household spills are easy to clean with the use of a mop, warm water, and a pH neutral cleaner. Do not use acidic cleaners on porcelain or ceramic products. Grout is easily stained. We recommend the use of a grout sealer or a polymer based grout material during installation for the highest stain resistance. Mop your floors at least every other week to prevent grout stains and dirt buildup.

Disclaimers

Properties

All images are representative of a product’s potential characteristics and are only meant to provide and overall look of the product. Because colors and shading vary on different screens, we do not guarantee that these images will 100% match the actual product. Tiles are subject to variations in color, shade, sizing, surface texture and finish. Field tiles and corresponding trims and accessories may not match 100%.

Installation

The maximum allowable installation offset is 20% unless otherwise indicated. Always install with a grout line. No claims will be considered when the product is installed without grout lines. Minimum grout joint must be 1/8 inch. We strongly recommend the use of a leveling system during installation. Do not use the product on pools, spas, hot tubs and/or submerged applications unless otherwise specifically indicated. Please refer to the TCNA Handbook for the latest porcelain and ceramic tile installations guidelines.

Prior to installation, installer must blend tiles from several different boxes to achieve an even distribution of color range and to avoid or minimize pattern repetition. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. All products are deemed accepted once installed.

We reserve the right to make changes to product specifications at any time without notice.

Reviews

JC Floors Plus
4.0
powered by Facebook
Paco Sanz
Paco Sanz
2018-08-08T14:37:25+0000
EXCELENT COMPANY.
Danielle Assayag-Greenhough
Danielle Assayag-Greenhough
2017-07-26T14:18:48+0000
Amazing product, excellent service!!! Deliver on their promise.
Rochi Goldenhorn
Rochi Goldenhorn
2017-06-09T03:52:07+0000
Son espectaculares y no tienen nada que ver con el señor carlos vazquez de @jcf floors and beyond
Marisol Medranda
Marisol Medranda
2015-04-05T01:26:09+0000
I needed tiles and mosaics to redo one of the bathrooms on my house. They have so much options that it was kind of hard to make up my mind, which is a good problem to have. The service was great and their prices are very good imo. I will return when Im ready to redo my other bathroom.
Juan Pablo Zamora
Juan Pablo Zamora
2015-03-12T22:06:34+0000
GREAT customer service. Very large selection of floors and very fair prices in laminate floors, tiles, and moldings which are like half the price of Home Depot.